10' x 20' Pop-Up Event Tent w/ Custom Printed Canopy
Our commercial grade 10 x 20 pop-up steel (hex leg) event tent frame is a sturdy beam with reinforced interiors and has high performance synthetic joint components with a four point height range. Our oxford polyester tent tops are made of durable water and fire resistant polyester and are full color dye sublimation printed on each panel and valance. The tent frame can come in 40mm steel (hex leg) commercial event tent frame, 40mm aluminum (hex leg) commercial event tent frame, 40mm aluminum (hex leg) heavy duty commercial event tent frame or 50mm aluminum (hex leg) super duty commercial event tent frame. These tents provide shade during outdoor events and can even be used indoors! The custom printed canopy tops are printed on 600D Oxford material. This material is water and fire resistant, more durable and longer lasting than the typically used 500D Oxford material. The 600D Oxford is made with PU coating and the color fastness reach to level 5. This material is also anti-mold and ultraviolet-proof. The retardancy of this material reach to American CP AI-84 standard. With this kit we also include an event tent carry bag and tent frame ground stakes with rope. Our event tent carry bag is made of heavy duty polyester and nylon. The event tent carry bag has exterior handles and a shoulder strap for easy carrying. This event tent carry bag also has room inside the carry bag to store canopy in with tent frame, keeping everything together and tidy. The tent frame ground stakes are made of steel and come with nylon rope to secure the tent frame. These tent frame ground stakes and nylon rope come as a set of four. Our superior methods of printing means that every one of our custom printed products are manufactured to the highest standard. If you need art assistance with your graphic template, please add the custom art setup charge. Your graphic will then be assigned to a qualified graphic designer who will assist you with your logo and typesetting. The custom art setup charge is either a 1 time ($45.00) fee for assistance with a pre-set typesetting, logo and vector file (PDF, EPS, AI), or if you need more in depth assistance it is then a $75.00 an hour charge. The art setup charge will be waived if you do not need assistance. For an estimate please call 888-675-9610 or email us at email@example.com. If your file is too large for email, options include dropbox.com or FTP to our server. High quality and durable materials are sure to make your decision in buying this product a win win.
Best quality construction available. Lowest Pricing GUARANTEED!!!
- (1) 10' x 10' 40mm commercial grade pop-up & collapsible standard steel (hex leg) tent frame
- (1) Custom printed tent canopy cover on 4 sides in full color by dye sublimation and valances are printed FREE
- (1) Event tent carry bag for storage
- (1) Set of 4 tent frame ground stakes and rope for pop-up tents
- Heavy duty nylon adjusters
- Synthetic joint components for easy assembly and long lasting performance
- Sturdy beam with reinforced interiors and has high performance synthetic joint components
- Four point height adjustable legs with easy pressing synthetic and durable adjusters
- Rises to 7' tall
Carry Bag Details:
- Commercial polyester fabric cover, treated inside and out with fade blockers, anti-aging anti-mold and anti-fungal agents
- Polyurethane inside lining, double stitched for optimal water resistance and drip-free seams
- 50+ UPF rating blocks more than 98% of UV harmful rays,. UPF represents Ultraviolet Protection Factor and indicates how much of the sun's radiation is absorbed. 50+ UPF is the highest fabric rating for radiation exposure. Only 2% of the UV rays will penetrate through the canopy's fabric.
- Printed on 600D Oxford material, this material is more durable and longer lasting than the typically used 500D Oxford material
- Water and Fire resistant
- The color fastness reach to level 5
- The flame retardancy reach to American CP AI-84 standard
Ground Stake Details:
- Made of polyester and nylon
- Heavy duty
- Exterior handles for easy handling w/ shoulder strap
- Room to fold canopy and store inside carry bag with tent frame
- For easier handling upgrade to wheel bag so you don't have to carry tent kit
Portable LED Light Details:
- Ground stakes made of steel
- Nylon rope to secure tent frame
- Comes in a quantity of 4 each (stakes and rope)
- One touch button system to turn ON/OFF, check battery level and change light mode
- Meets ROHS environmental standard
- Energy saving product
- Made with AI alloy casing and engineering plastics which are durable and safe
- 3 Operation light modes: 1) 100% lighting 2) 50% energy saver 3) flash alarm w/ red cover
- Battery lifetime is 2 years or over 500 times recharging
- Comes with charger, red cover for flash alarm and clip to connect to tent and umbrella frames
Tent Frame Options:
- Choose portable LED light option: no portable LED light, (2) portable LED lights or (4) portable LED lights
- Choose tent frame custom flag kit option: no tent frame custom flag kit, (2) tent frame custom flag kits-double-sided or (4) tent frame custom flag kits-double-sided
- Choose tent frame sandbag option: no tent frame sandbags or (4) tent frame sandbags
- Choose tent wheel bag option: no tent wheel bag or 10x10 tent wheel bag
- Choose pop-up event tent canopy back wall option: no pop-up event tent back wall, single-sided pop-up event tent back wall or double-sided pop-up event tent back wall
- Choose pop-up event tent side wall 10' x 7' (available as single or double-sided and available in quantities 1 or 2)
- Choose pop-up event tent half side walls 10' x 3' (available as single or double-sided and available in quantities 1 or 2 comes with side wall rails)
- Choose table covers 6' or 8' (available as fitted or stretch polyester fabric)(sold separately)
- Add "D" Rings to the canopy corners for use with included tie down ropes. Additional charges may apply for this option.
- Add water proofing to seams. Small water leaks may occur on the seams of standard production. Water proofing seams ads a heat treatment to hems eliminating this chance. Additional charges may apply.
Art Setup Charge Details:
- PRO LINE XS 40mm Steel ( hex leg) commercial event tent frame
- PRO LINE X. 40mm Aluminum (hex leg) commercial event tent frame
- MAG LINE I 40mm Aluminum (hex leg) heavy duty commercial event tent frame
- MAG LINE II 50mm Aluminum (hex leg) super duty commercial event tent frame
Warning: Properly secure your canopy! Heavy winds will cause your canopy to move and in high winds they will blow away. This can cause damage to other booths and people. We offer sand bags, water weights, steel plates and ground stakes to secure your canopy. You can also use cinder blocks with ropes or your own sand bags. Some events will require you to secure your canopies!
- For assistance with a pre-set typesetting, logo and vector file (PDF, EPS, AI) 1 time charge of $45.00 will be applied
- For more in depth assistance a $75.00 an hour charge will be applied
- If you do not need assistance the art setup charge will be waived
- For more information please call 888-675-9610 or email us at firstname.lastname@example.org
Color Printing: 600D Oxford UV Coating material: Color will appear slightly brighter and more vibrant than other printed fabric materials. That is the nature of this material type. All fabrics and substrates will have slight color variance as there are many different types of fabrics. The fabrics each have different absorbency rates and will refract light differently. When color accuracy is critical, Pantone colors must be called out on artwork file. When Pantone colors are requested, due to the nature of fabric and different absorbency rates, we offer an 8% color shade allowance. As long as the printed color is within 8% of the Pantone color swatch, we are within acceptable color guidelines. If outside this 8% tolerance, we will offer to reprint your order and ship reprinted merchandise to one location at our expense. Always striving for best value, we only charge $10 per PMS color usage. Other companies charge $20 per color. If a Pantone color is not requested, the normal acceptable variance is (+/-) 15% from the converted CMYK/RGB color on the approved artwork file.
Hardware and Frames:
Usually ships in 1-2 Business Days
Custom Printed Graphics:
Usually ships in 10-15 Business Days, typically sooner.
**Note**- Time frame for turnaround time begins once the artwork has been approved. If artwork is approved before 3pm PST then artwork will be submitted that business day for printing. If artwork is approved after 3pm PST artwork will then be submitted for printing on the following business day.
****Do you need this item sooner? Please call 888-675-9610 with your delivery date for other production options! ****